Fruity Summer No 2 Printed Picture Photo Roller Blind - 1X2710844

1. Inside the Window (Recess Fitting)

When fitting inside a window recess, we make the deductions for you to ensure a perfect finish. Use the following guide to install your wooden blinds

Give us the exact size of your window opening. We do the math for you.

Step 1: Measure the full width and height of the inside of your window recess.

Step 2: Enter those exact measurements into the order form.

⚠️ IMPORTANT: Do NOT make any deductions yourself. We will automatically subtract the necessary amount to ensure the brackets fit perfectly inside your window.

How it works: The fabric will always be slightly narrower than the window to leave room for the brackets.

Standard Fixings: Fabric will be 3.5cm narrower than the measurement you provide.

No-Drill Fixings: Fabric will be 4.7cm narrower than the measurement you provide.

In both cases, the total width (fabric + brackets) will match your inside recess window size perfectly.

EXAMPLE IF ORDERING NO DRILL : if your inside recess is 100cm wide, we will make the blind material to 95.3cm wide and then once the end fittings are applied the overall width will then be 100cm wide

PLEASE BEAR THE ABOVE INFO IN MIND WHEN ORDERING FOR AN INSIDE RECESS AS THE BLIND FABRIC WILL VARY IN WIDTH DEPENDING ON WHAT TYPE OF FITTING YOU CHOOSE

2. Outside the Window (Exact Fitting)

We do not apply deductions to Exact size orders. We will make your blinds to the specific measurements you enter

EASYTURN NO DRILL NOT APPLICABLE FOR OUTSIDE THE WINDOW

You tell us exactly how wide you want the fabric to be.

Step 1: Measure your window opening.

Step 2: Add at least 7cm to the width (this allows a 3.5cm overlap on each side to block out light).

Step 3: Enter this final "plus-size" measurement into the order form.

⚠️ PLEASE NOTE: We will make the fabric the exact width you order. However, the brackets will add an extra 3.5cm to the overall width. Please ensure you have enough wall space to accommodate the brackets on either side of the fabric.

For example, if your measurement is 100cm wide, we will make the blind material to 100cm wide and then once the end fittings are applied the overall width will then be 103.5cm wide.

3. Split Blinds (For Inside Recess Fitting)

Recess or outside recess fitting?

When a window is not flush to the wall, a recess is created. This internal space in a room is rarely used during the day, unless the sill of the window is put to some use. Therefore, hanging a blind outside of the recess usually causes no problem in terms of lost space, but fitting inside will make the blind nearer to the window.

When deciding on mounting inside or outside recess, ensure that there are no obtruding objects (window catches, electrical sockets, tiles etc.) to hinder the operation of the blind.

What we do

INSIDE RECESS FIT

For an inside recess fit we deduct from the width measurement you provide us to ensure that the blind with the controls and brackets will fit the into the recess of your window.

Standard Fixings: Fabric will be 3.5cm narrower than the measurement you provide.

No-Drill Fixings: Fabric will be 4.7cm narrower than the measurement you provide.

EXAMPLE IF ORDERING NO DRILL : if your inside recess is 100cm wide, we will make the blind material to 95.3cm wide and then once the end fittings are applied the overall width will then be 100cm wide

OUTSIDE RECESS

You may not have a recessed window or for blackout purposes you may want to cover the entire window space. In these cases, this is the option to select.

The blind material will be made exactly to the sizes you give to us. 

For example, if your measurement is 100cm wide, we will make the blind material to 100cm wide and then once the end fittings are applied the overall width will then be 103.5cm wide.

EASYTURN NO DRILL NOT APPLICABLE FOR OUTSIDE THE WINDOW

ROLL TYPE

The blind can either roll from behind the roller or over the front of the roller. Typically, roller blinds are positioned so that the blind rolls from behind the top roller, especially for inside recess fit blinds so that they are as close to the window as possible.

However, if you have objects that protrude from the window, you may decide to roll the blind over the roller. This way, the blind will not be obstructed when it is pulled down over the window.

Remote control roller blinds are a perfect addition to the modern-day home or office. No longer seen as the exclusive luxury of the elite, remote control blinds offer a tangible solution to blind cord safety issues and of course those hard to reach areas.

1. Safety First: Say goodbye to the tangled mess of cords that pose a risk to children and pets. With remote control blinds, you're opting for a safer environment without compromising on style or functionality.
2. Convenience at Your Fingertips: Whether you're cozy in bed or in the middle of a movie marathon, adjust your blinds without moving an inch. Those hard-to-reach windows? They're now effortlessly accessible.

• 1 x Remote
• 1 x Pre installed motorised mechanism
• 1 x Charger 

Key benefits of remote blinds:

• No Pull Cord
• Easy to Use
• No installation of motors etc, everything comes already installed into the blind ready to go
• Last approx 3 months before the motor needs charging.

No, the custom design is printed onto one side of the roller blind only. The reverse side is a neutral, off-white colour.

We aim to keep as much of the image on the blind as possible. Because window sizes vary, keeping the entire uncropped image is not always possible, but we ensure your image is never compromised:

No Distortion: We never stretch or distort your image.

Minimal Cropping: We always try to crop as little of the original image as possible.

AI Expansion: We use AI to expand our images perfectly to fit your dimensions with no stretching.

We use Epson’s UltraChrome RS (Resin) inks, which are GREENGUARD Gold certified.

They are odourless, water-based and highly eco-friendly.

The bottom of the blind is finished with a clean, fabric-wrapped bottom bar. The printed fabric wraps continuously around the bar to maintain a neat appearance, and the edge is completed with a white end cap.

The printed fabric does not show on the reverse side so the white bottom bar is visible to blend in with the rest of the unprinted material.

We package your order securely using the following steps:

Package Sleeve: Your blind is first wrapped in a protective sleeve.

Solid Postal Tube: It is then safely secured within a solid postal tube for transit.

Both our light block blinds and translucent blinds are printed onto a high-quality fabric that features the following specifications:

Eco-Friendly: It is a premium, PVC-free material.

FIRE RATING: BS EN 13501-1 - The legally required fire classification for commercial/public buildings

Our fabrics are also OEKO-TEX® STANDARD 100 certified - Free of harmful substances.

Yes, our printed roller blinds are designed with safety and sustainability in mind. We ensure our products are eco-friendly through the following certified components:

OEKO-TEX® Certified Fabrics: Our fabrics are OEKO-TEX® STANDARD 100 certified, ensuring they are entirely free of harmful substances.

PVC-Free Material: Our light block fabric is a premium, PVC-free option.

GREENGUARD Gold Certified Inks: We use Epson’s UltraChrome RS (Resin) inks, which meet strict environmental standards for low chemical emissions.

FIRE RATING: BS EN 13501-1 - The legally required fire classification for commercial/public buildings

All our blinds adhere to the BBSA’s strict child safety guidelines and meet the British and European safety standard EN 13120:2009 + A1:2014. If a child or vulnerable person will be using the room where the blind is installed, you MUST install the provided safety device to securely tie up the pull cord, keeping it out of reach of children, vulnerable individuals, and pets.

Even with the safety device fitted, we recommend moving beds, cots, and furniture away from any windows.

Click here for more info

Our blinds come with a two-year warranty for your peace of mind.

We are so confident in the quality, design and durability of our roller blinds that every one comes with a free 2-year extended guarantee. Choose your perfect blind with complete peace of mind.

Our guarantee is simple, with just a few obvious conditions and exclusions.

How to make a claim

We've made claiming as hassle-free as possible. If you notice a manufacturing issue within your 2-year guarantee period, just follow these steps:

1. Get in touchEmail us at info@artfever.uk or use our contact form.
2. Tell us the detailsInclude your order number, which blind has the issue and a short description of the fault.
3. Send photosAttach a couple of clear photos or a short video showing the fault, so we can resolve it quickly.

We will either repair or replace the product. Occasionally we may need the blind returned to us for inspection before a replacement is sent. Once verified, our team will complete your repair or replacement as quickly as possible.